ER Series 19" Racks

A major consideration with most 19⁄ enclosures is the cost of shipping. The choice is usually between shipping assembled cabinets & effectively paying a hefty premium to move air about, or having to deal with often time consuming & complicated assembly tasks.

MW 'ER' racks have been designed to minimise these problems, being very easy to assemble & very compact to ship in 'flat pack' form. The illustrationshowing ten 42Ru racks, both assembled & packed , gives a good idea how compact 'ER' racks are in their shipping cartons. A low intial price coupled with economy of shipping makes the 'ER' rack system a very cost effective solution for many applications.

Please refer to the pdf for weights & dimensions

Notes:

1. Rack frames comprises of an upright set with integral 19" rack strip & top⁄bottom panel & frame kit
2. Side⁄rear panels are packed in pairs but can be shipped as singles, ER⁄FEDracks use PS panels on the rear. ER⁄FS racks use PS panels on the sides & rear.
3. One rack unit (Ru) = 44.45mm⁄1.75 inches.
4. Internal mounting depth: ERFS 593mm ⁄ ERFED 713mm. Depth between vertical rack rail & is fixed on ER series racks

19" Bay joining kit

Comprising of a set of bolts & spacers the bay joining kit fits to the rack rail section in the side uprig hts of ER racks. Bay joining kits cannot be used if intermediate side panels require to be fitted

AC Distribution Rails

AC distribution rails are available from stock with either UK 13amp sockets or 6amp IEC sockets (others on request). AC rails are available with 10,15 or 20 outlets & fit neatly into either, or both the rear uprights of ER rack frames without interfering with the fitting of other items.

• Code: MDU10V-13A⁄ER (all sizes)
• Code: MDU15V-13A⁄ER (22/30/38/42Ru)
• Code: MDU20V-13A⁄ER (38 & 42Ru)
• Code: MDU10V-IEC⁄ER (all sizes)
• Code: MDU15V-IEC⁄ER (all sizes)
• Code: MDU20V-IEC⁄ER (all sizes)

Cable Tray

Steel plated cable tray is available in 150mm widths and is supplied complete with mounting bars that fit to the 19” Rack stripping in the side uprights. ERFS (613 depth) or ERFED (733 depth) kits should be specified to suit Racks in use.

• Code: ER11FED-CT150
• Code: ER11FS-CT150
• Code: ER22FED-CT150
• Code: ER22FS-CT150
• Code: ER30FED-CT150
• Code: ER30FS-CT150
• Code: ER38FED-CT150
• Code: ER38FS-CT150
• Code: ER42FED-CT150
• Code: ER42FS-CT150

Please refer to the PDF for a full list of accessories.